Products Profile Cut Components
Cathodic Insulation Kits
Flange insulation products are used worldwide for all types of piping and pipeline systems to isolate and prevent the flow of electric currents through a fluid or gas pipe system. A primary benefit…
Cathodic Insulation Kits
Flange insulation products are used worldwide for all types of piping and pipeline systems to isolate and prevent the flow of electric currents through a fluid or gas pipe system. A primary benefit is the control of damage caused by “electrolysis” and the danger of static electrical build up and subsequent discharge. LEARN MOREHeat Exchangers
Double-jacketed gaskets shall be made with a filler completely enclosed in a corrugated metal jacket. For gaskets NPS 8 and larger, the corrugation pitch shall be 0.13-inch (3.2 millimeters) minimum and 0.25-inch (6.4…
Heat Exchangers
Double-jacketed gaskets shall be made with a filler completely enclosed in a corrugated metal jacket. For gaskets NPS 8 and larger, the corrugation pitch shall be 0.13-inch (3.2 millimeters) minimum and 0.25-inch (6.4 millimeters) maximum. For gaskets NPS 6 and smaller, the pitch shall not exceed 0.16-inch (4.0 millimeters). LEARN MORERTJ Gaskets
The R-Type ring gasket can be ordered to two different profiles, oval or octagonal in cross-sections. Both types have identical pitch diameter as the flange groove they correspond to. These gaskets are used…
RTJ Gaskets
The R-Type ring gasket can be ordered to two different profiles, oval or octagonal in cross-sections. Both types have identical pitch diameter as the flange groove they correspond to. These gaskets are used in pressures up to 5,000 PSI. The octagonal type has a higher sealing coeffient than the oval, therefore being the better gasket of the two. The oval type is the only gasket that will fit a bottom radiused groove. Flanges with flat bottom v-grooves will accept either style. Gaskets that have been torqued initiating a metal-to-metal seal should be discarded and not reused. LEARN MORESpiral Wound Gaskets
We manufactur “SpiroNat” spiral-wound gaskets and are committed to providing our customers requirements in the most expeditious manner possible.
Spiral Wound Gaskets
We manufactur “SpiroNat” spiral-wound gaskets and are committed to providing our customers requirements in the most expeditious manner possible. LEARN MORECut Gaskets
The following selection table for Asbestos-free gasketing, is developed to meet specific service conditions.
Cut Gaskets
The following selection table for Asbestos-free gasketing, is developed to meet specific service conditions. LEARN MOREPacking
Cup and Cone packing of PTFE (Polytetrafluorothylene) seal with less pressures than similar “slug” packings.
Packing
Cup and Cone packing of PTFE (Polytetrafluorothylene) seal with less pressures than similar “slug” packings. LEARN MORETapes & Adhesives
Miscellaneous Adhesives and Glues…
Tapes & Adhesives
Miscellaneous Adhesives and Glues… LEARN MORE
Make it better
To become a trusted supplier to leading manufacturers, we have to provide exceptional value. Through expert knowledge of materials and processes, and by taking a creative approach to technical problems, that’s exactly what we do. For every product our customers make, we help them make it better.